Author Index

A

  • Abbasalizadeh, Majid Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Afrand, Masoud An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Ahmadi, Pouria Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Ahmadi Danesh Ashtiani, Hossien Optimization of cold thermal energy storage systems with commissioning and storage time approach by using intelligent algorithms [Volume 11, Issue 4, 2023, Pages 439-453]
  • Ahmadi Nadooshan, Afshin An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Akbari, Masoud Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]
  • Akbari, Zahra Forecasting the gasoline consumption in Iran’s transportation sector by ARIMA method [Volume 11, Issue 4, 2023, Pages 425-438]
  • Akhavan Behabadi, Mohammad Ali The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation [Volume 11, Issue 4, 2023, Pages 371-386]
  • Attarsharghi, Samareh Using machine learning and optimization for controlling surface roughness in grinding of St37 [Volume 11, Issue 3, 2023, Pages 321-337]

B

  • Boroushaki, Mehrdad Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Bozorgi, Alireza The importance of tip speed ratio on noise Pollution of H-Darrieus wind turbines [Volume 11, Issue 3, 2023, Pages 305-319]

D

  • Dehghanpour Abyaneh, Mohsen Using machine learning and optimization for controlling surface roughness in grinding of St37 [Volume 11, Issue 3, 2023, Pages 321-337]
  • Dehvari, Hooman How life cycle assessment is key to reducing carbon emissions in architectural development: Circular economy and regenerative design [Volume 11, Issue 4, 2023, Pages 401-424]

E

  • Emamifar, Armin Thermodynamic analysis of a combined ORC and ejector vapor compression refrigeration system utilizing a PEMFC [Volume 11, Issue 3, 2023, Pages 261-275]
  • Eshgarf, Hamed An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]

F

  • Fallah Ardashir, Ali Utilizing Blast Furnace gas to run a supercritical CO2 cycle to meet part of the internal consumption of the iron plant and to produce fresh water through a multi-effect desalination unit [Volume 11, Issue 3, 2023, Pages 339-351]
  • Farajollahi, Meisam Aerodynamic design of horizontal axis wind turbine using different airfoils [Volume 11, Issue 4, 2023, Pages 387-399]
  • Farhang, Behzad Techno-economic investigations of a new cogeneration energy system for hydrogen, ammonia, and power generation [Volume 11, Issue 3, 2023, Pages 353-369]
  • Fazaeli, Reza Optimization of cold thermal energy storage systems with commissioning and storage time approach by using intelligent algorithms [Volume 11, Issue 4, 2023, Pages 439-453]

G

  • Gandjalikhan Nassab, Seyyed Abdolreza Numerical investigation on the performance of double pass two glazed solar air heaters with jet impingement [Volume 11, Issue 1, 2023, Pages 13-28]
  • Ghaebi, Hadi Techno-economic investigations of a new cogeneration energy system for hydrogen, ammonia, and power generation [Volume 11, Issue 3, 2023, Pages 353-369]
  • Ghasemi, Jahan Bakhsh The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]

H

  • Habibzadeh, Amin Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Hadad, Mohammadjafar Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Hadad, Mohammadjafar Using machine learning and optimization for controlling surface roughness in grinding of St37 [Volume 11, Issue 3, 2023, Pages 321-337]
  • Hadidi, Babak Numerical investigation of the simultaneous utilization of multiple phase change materials in the performance of thermal management system combined with heat sink [Volume 11, Issue 4, 2023, Pages 455-481]
  • Haji Agha Alizade, Hossein The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Hamedi, Razieh The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Hosseinjany, Salar Optimization of cold thermal energy storage systems with commissioning and storage time approach by using intelligent algorithms [Volume 11, Issue 4, 2023, Pages 439-453]

J

  • Jafarmadar, Samad Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Jahani, Fatemeh Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]
  • Javani, Nader Techno-economic investigations of a new cogeneration energy system for hydrogen, ammonia, and power generation [Volume 11, Issue 3, 2023, Pages 353-369]

K

  • Kabiri Dehkordi, Adel Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • Khoshgard, Ahmad Optimization of cold thermal energy storage systems with commissioning and storage time approach by using intelligent algorithms [Volume 11, Issue 4, 2023, Pages 439-453]
  • Khoshkname, Donya The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]

M

  • Maleki, Farhad Forecasting the gasoline consumption in Iran’s transportation sector by ARIMA method [Volume 11, Issue 4, 2023, Pages 425-438]
  • Manafzadeh, Pegah Forecasting the gasoline consumption in Iran’s transportation sector by ARIMA method [Volume 11, Issue 4, 2023, Pages 425-438]
  • Mirala, Fatemeh The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation [Volume 11, Issue 4, 2023, Pages 371-386]
  • Mirhosseini, Mojtaba Aerodynamic design of horizontal axis wind turbine using different airfoils [Volume 11, Issue 4, 2023, Pages 387-399]
  • Mirzaee, Iraj Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Mirzaeia, Rahmat Allah Aerodynamic design of horizontal axis wind turbine using different airfoils [Volume 11, Issue 4, 2023, Pages 387-399]
  • M. Ziapour, Behrooz Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]

N

  • Naderi, Ehsan The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation [Volume 11, Issue 4, 2023, Pages 371-386]
  • Narimani, Parviz Using machine learning and optimization for controlling surface roughness in grinding of St37 [Volume 11, Issue 3, 2023, Pages 321-337]
  • Nikbakht Naserabad, Sadegh Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]

P

  • Pirmohamadi, Alireza Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]

R

  • Raisi, Afrasiab An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Ranjbar, Faramarz Thermodynamic analysis of sustainable electric power production using solar tower during day and syngas combustion from municipal waste gasification during night [Volume 11, Issue 3, 2023, Pages 277-304]
  • Ranjbar, Faramarz Utilizing Blast Furnace gas to run a supercritical CO2 cycle to meet part of the internal consumption of the iron plant and to produce fresh water through a multi-effect desalination unit [Volume 11, Issue 3, 2023, Pages 339-351]
  • Razavi, Seyed Esmail Effect of fire location on the smoke temperature and CO distributions in a subway tunnel with train carriages: A numerical study [Volume 11, Issue 2, 2023, Pages 231-246]
  • Reshad, Ali Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Roohi, Reza Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]

S

  • Saedodin, Seyfolah Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Sahamiyan Moghaddam, Melika How life cycle assessment is key to reducing carbon emissions in architectural development: Circular economy and regenerative design [Volume 11, Issue 4, 2023, Pages 401-424]
  • Sajadi, Ahmad reza Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • Sajadi, Behrang Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]
  • Sajadi, Behrang Energy performance sensitivity analysis on building's passive technologies effective parameters, in an NZEB EnergyPlus-simulated villa in Tehran's weather conditions with OFAT methods [Volume 11, Issue 2, 2023, Pages 213-229]
  • Sajadi, Behrang The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation [Volume 11, Issue 4, 2023, Pages 371-386]
  • Sattari, Saeed Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Shadidi, Behdad The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Sharifi, Ali Thermodynamic analysis of sustainable electric power production using solar tower during day and syngas combustion from municipal waste gasification during night [Volume 11, Issue 3, 2023, Pages 277-304]
  • Shirvani, Hassan Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]

T

  • Torabi, Farshad The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]

V

  • Varzandeh, Amir Energy performance sensitivity analysis on building's passive technologies effective parameters, in an NZEB EnergyPlus-simulated villa in Tehran's weather conditions with OFAT methods [Volume 11, Issue 2, 2023, Pages 213-229]
  • Veysi, Farzad Numerical investigation of the simultaneous utilization of multiple phase change materials in the performance of thermal management system combined with heat sink [Volume 11, Issue 4, 2023, Pages 455-481]

Y

  • Yari, Mortaza Utilizing Blast Furnace gas to run a supercritical CO2 cycle to meet part of the internal consumption of the iron plant and to produce fresh water through a multi-effect desalination unit [Volume 11, Issue 3, 2023, Pages 339-351]

Z

  • Zarei, Mohammad Javad The importance of tip speed ratio on noise Pollution of H-Darrieus wind turbines [Volume 11, Issue 3, 2023, Pages 305-319]
  • Zeinali, Mohsen Thermodynamic analysis of sustainable electric power production using solar tower during day and syngas combustion from municipal waste gasification during night [Volume 11, Issue 3, 2023, Pages 277-304]